Hunan Jiushun Hongye Electronic Technology Co., Ltd.

x
page title

Reno 3 and V20 Screen Cross-Reference: Which Fits Which

If you buy replacement screens for a mixed 4G and 5G repair trade, the useful question is not whether a screen is compatible. It is which screen SKU a given phone maps to. Compatible is a yes or no word; a cross-reference is a table. The most expensive error in this corner of the catalogue is treating a 4G handset and its 5G sibling as one part, because retail naming makes them sound interchangeable and the hardware does not.

Reno3 and V20 are the two families where this shows up most in South Asian wholesale. A Reno3 Pro 4G and a Reno3 Pro 5G sit near each other under almost the same label, but they take different assemblies. A V20 and a V20 Pro look like a trim step within one phone, yet they do not share a screen. Meanwhile S6 and Y73S genuinely do share one, and buyers still split them into two order lines.

This guide gives you the confirmed mapping for both families, the three name pairs that cause the most misfires, and a working method for reading codes off old phones and grouping a mixed batch before a purchase order exists. The current OPPO listings start on the OPPO category page and the Vivo listings on the Vivo category page; everything below is about ordering them against the right SKU.

Compatibility Is a Mapping, Not a Yes or No

A screen does not carry a single property called compatible. It carries a set of phones it fits, and that set is defined by hardware: board layout, flex exit point, connector pinout, camera and sensor cutouts, and the position of the backlight window. Two phones with one retail name can differ on several of those points at once. That is why a supplier answering yes to the word compatible has not actually told you anything you can order from.

The safe unit of thought is the pair: this phone, that SKU. Once you hold a pair, you can ask whether the same SKU also covers a second phone, and the answer is a fact to look up rather than an assumption to make. A shared part across variants is common, but it is always per model. It is never a rule you can carry from one brand to the next, or from one generation to the next.

This is also why a photograph of the front glass settles almost nothing. The glass is the one layer that looks identical across most variants. The evidence lives on the flex and the frame, which is where the differences are printed or shaped.

Why the 4G and 5G Split Is the Costly One

The 4G and 5G versions of a name are the classic trap because they are marketed as one phone with a connectivity option. Inside, they are often two builds: a different board, a different antenna path, and sometimes a different camera arrangement that moves a cutout by a few millimetres. An assembly from the wrong build can still seat in the frame and power on, which is exactly what makes the error travel all the way to the customer before anyone notices.

The unit price is the smallest part of the loss. A wrong-variant carton in a mixed shipment means the line was picked against a name instead of a code, the replacement has to be sourced again, and the bench time is spent twice. For a wholesaler working on thin margins across many models, one wrong line can erase the return on several correct ones. That is the reason this article treats the 4G/5G flag as a hard divider, not a footnote.

The Confirmed Cross-Reference: Model to Screen SKU

The table below contains only mappings we have confirmed. Where a model is not in that set, the entry is the same every time: confirm against hardware code. We have chosen that phrase over a guess from a similar-sounding name.

Phone modelScreen SKUShared part?Basis
Reno3Reno3 / Reno3 Pro 5G assemblyYes - shared with Reno3 Pro 5GConfirmed: assembly listed for both Reno3 and Reno3 Pro 5G
Reno3 Pro 5GReno3 / Reno3 Pro 5G assemblyYes - shared with Reno3Confirmed: same assembly covers the 5G variant
Reno3 Pro 4GReno3 Pro 4G assembly (standalone)No - standalone partConfirmed: listed as a 4G-only assembly
V20 (V2025)V20 family assemblyYes - shared across V20 familyConfirmed: covers V2025, Y75 (2117), V20 2021 (V2040), V21e (V2061), V23e 5G (V2126)
Y75 (2117)V20 family assemblyYes - sharedConfirmed: code 2117 appears in the V20 family listing
V20 2021 (V2040)V20 family assemblyYes - sharedConfirmed: code V2040 appears in the V20 family listing
V21e (V2061)V20 family assemblyYes - sharedConfirmed: code V2061 appears in the V20 family listing
V23e 5G (V2126)V20 family assemblyYes - sharedConfirmed: code V2126 appears in the V20 family listing
V20 ProV20 Pro assembly (standalone)No - standalone partConfirmed: listed as a separate Pro module
S6 (1962A)S6 / Y73S assemblyYes - shared with Y73SConfirmed: listed for Y73S (V2031A) and S6 (1962A)
Y73S (V2031A)S6 / Y73S assemblyYes - shared with S6Confirmed: same assembly covers both codes
Any other model not listed aboveconfirm against hardware codeconfirm against hardware codeNot a published cross-reference - send the code before ordering

Two listings anchor this cross-reference. They are the parts most often confused with a neighbour, so keep their titles and codes in view when you build a list.

Replacement LCD Screen Assembly for OPPO Reno3, suitable for Reno3 Pro 5G
OPPO Reno3 Screen Assembly
For OPPO Reno3 · suitable for Reno3 Pro 5G · touch screen display · high quality repair part
View Product →
V20 Mobile Phone LCD Touch Screen Assembly Replacement for V20/V2025
Vivo V20 Screen Assembly
For V20 / V2025 · LCD touch screen assembly · replacement part
View Product →

Three Name Pairs Buyers Misread

These three pairs account for most of the wrong cartons we are asked to untangle. Two of them are not shared; the third is shared and still gets split into two order lines by mistake.

PairWhat the names suggestWhat the hardware saysWhat to put on the order
Reno3 Pro 4G vs Reno3 Pro 5GOne phone, differing only by radioTwo SKUs: 4G is standalone; 5G shares the Reno3 assemblyTwo lines, keyed to the 4G or 5G code on the box
V20 vs V20 ProPro is a trim level of the same phoneTwo SKUs: V20 joins the shared family; V20 Pro is its own moduleTwo lines; never merge them on the word V20
S6 vs Y73S (V2031A)Two names, therefore two partsOne shared assembly covers S6 (1962A) and Y73S (V2031A)One line carrying both codes

Reno3 Pro 4G vs Reno3 Pro 5G

These are two SKUs. The Reno3 Pro 4G assembly is a standalone 4G part. The 5G Pro, by contrast, is covered by the Reno3 assembly together with the plain Reno3. If your batch contains both radios, write two lines and key each one to the code printed on the box. Never let a single line say Reno3 Pro, because that phrase describes both and will be read as whichever one the picker sees first.

V20 vs V20 Pro

The V20 Pro module is its own assembly and is not part of the shared V20 family. The V20 family part covers V2025, Y75 with code 2117, V20 2021 with code V2040, V21e with code V2061, and V23e 5G with code V2126. A single line labelled V20 therefore already spans several retail names, and adding Pro to it changes the part completely. Two lines, always.

S6 and Y73S: the pair that is actually one part

Here the risk runs the other way. The S6 and Y73S assembly is listed for Y73S with code V2031A and S6 with code 1962A. It is one SKU serving two names. Buyers who split it into two lines end up with duplicate stock and a higher unit cost for no reason. Put both codes on one line and treat the pair as a single shared part.

How to Read the Hardware Code From an Old Phone

You do not need the phone to be working to identify the part. You need one reliable code and one photograph. Work through these sources in order and stop at the first one that gives you a code you can match.

The phone itself

On a unit that still boots, the model number is in the device information screen. Write down the full string, including any suffix letters, because the suffix is often the difference between a 4G and a 5G build. If the screen is broken but the phone responds, a connection to a computer will usually still report the model.

The box and paperwork

The retail box sticker is the next best source and is often more precise than what the phone reports. Invoice lines and the repair job card are useful too, especially when a wholesaler has bought a mixed lot. Where a code appears on paper and on the phone and they disagree, send both and let the supplier ask the question back.

The failed assembly itself

When nothing else survives, photograph the old part before it leaves the bench. Capture the printing on the flex, the shape of the frame, the connector position, and the count and placement of cutouts. Those features are what separate the pairs in the table above. A clear photo of both faces of the old assembly is usually enough to identify the SKU even without a working handset.

Grouping a Mixed Batch Into Order Lines

A mixed batch is safe once it is written as a list of hardware codes rather than a list of phone names. The grouping step is where most errors are prevented, and it takes longer to fix after the goods move than before.

  • One line per hardware code. If two retail names share a confirmed SKU, they belong on one line with both codes written on it.
  • Keep the 4G and 5G lines physically apart in the picking note, even when the retail names are almost identical.
  • For any model not in the confirmed table, write confirm against hardware code in the SKU field and attach the photo that will let us resolve it.
  • For the shared V20 family, list every code the line is meant to cover, so the picker can see that V2025, Y75, V20 2021, V21e and V23e 5G are one part.
  • Add a quantity to every line and keep the total equal to the number of assemblies you expect to receive.
  • Send the list in the same order as the picking plan, so a line number on the carton matches a line number in your message.

Send the Code List, Not Just the Names

Send your Reno and Vivo list with the hardware code and a photo of each old assembly. You will get a line-item quotation per SKU, and a direct answer when a model you asked for is not one we hold.

Request a Cross-Reference →

What We Ask Before We Quote a Mixed List

When a model is not in the confirmed set, we come back with a code question rather than a price. That exchange costs one message and prevents a carton. The OPPO and Vivo category pages linked at the top are a starting view of what we publish as standard items; they are not the edge of what can be made. If your batch includes a model you do not see there, ask with the code and a photo and you will get a clear answer on whether we can supply it.

What We Actually Do at STMAX

A cross-reference is only useful if the supplier on the other end reads it the same way. Here is what happens on our side between your list and your carton.

  • We ask for the model code and a photo before quoting a variant. A name on its own is not enough to start a line.
  • Every module is tested one by one before packing. That is what the ONE BY ONE TESTED mark on our cartons refers to.
  • Cartons carry the model and a batch code, so a delivered line can be traced back to the order it came from.
  • Assembly runs in a clean-area environment with full-chain production behind the stock, from panel and touch through bonding and final test.
  • Beyond the published catalogue we do custom TFT and AMOLED work across shapes and sizes, including long, round, square and irregular outlines.

Frequently Asked Questions

Is a Reno3 screen the same part as a Reno3 Pro 5G screen?

Yes, for the builds we’ve confirmed. The Reno3 assembly is listed for both Reno3 and Reno3 Pro 5G, so those two names map to one shared SKU. That does not extend to the Reno3 Pro 4G, which is a separate assembly. Because the two Pro names differ only by the network generation, write the 4G or 5G flag into the order line rather than relying on the word Pro to carry the meaning. If your code is not one we have listed, send it for confirmation instead of assuming the share applies.

Can I put V20 and V20 Pro on one purchase order line?

No. The V20 Pro is a standalone module, while the V20 belongs to a shared family that covers V2025, Y75 with code 2117, V20 2021 with code V2040, V21e with code V2061 and V23e 5G with code V2126. Combining them under the word V20 gives the picker two different parts on one instruction. Write two lines and keep the Pro line separate from the family line, with the full code set printed on the family line.

S6 and Y73S look like different phones. Why is one screen listed for both?

They are different retail names built on the same hardware. Our S6 assembly is listed for Y73S with code V2031A and S6 with code 1962A, so one SKU serves both. This is a confirmed share, not a general rule about similar-looking phones. Splitting it into two order lines creates duplicate stock and can raise the unit cost for no functional gain. Keep both codes on a single line and let the shared part do its job.

How do I find the hardware code if the phone will not power on?

Start with the retail box sticker and the invoice or job card, which often carry the full code including suffix letters. If those are gone, photograph the failed assembly before it is discarded: the printing on the flex, the frame outline, the connector position and the cutout pattern together identify the part in most cases. A connection to a computer sometimes still reports the model even when the display is dead. Send whatever you have and ask for confirmation.

What should I send to get a mixed batch quoted correctly?

Send a line-by-line list, one line per hardware code, with a quantity and a photo of the old assembly for each line. Mark shared families with every code they cover and mark anything unconfirmed as awaiting code check, rather than guessing a SKU. That lets us quote each variant on the same basis and build a packing plan that matches your list. For commercial terms, ask for current requirements instead of assuming a number.

Build a Cleaner Mixed Batch With Us

Tell us which models your workshop actually sees, with codes and quantities. We will tell you which ones share a part, which ones are standalone, and which ones need a code check before ordering.

Talk to the Sales Team →